TENNSMITH MECHANICAL SHEARS
MSE616 & MSE1016
LM1010, LM1012, LM1014 & LM1214
LM410, LM610, LM810
Tennsmith's MSE Series mechanical shears utilize a low maintenance design, coupled with an array of standard features for an attractive combination of high value and solid preformance. The MSE Series come standard with four-edge, high chrome blades, a self-leveling hold down bar with neoprene insert, single, continuous and jog stroke cycles, motor reverse switch, precision-machined table, dual inch/metric inlaid bed scales and non-metalic gibs. The MSE Series also incorporates the unique front operated 2x-F back gauge system. This system allows the operator to move the backstop from 0 to 30 inches in approximately 2 seconds with only two rotations of the handle. Capacities of the shears are 16-gauge mild steel, 22-gauge stainless with 73 or 121 cutting lengths and speeds of 40 strokes per minute.
LM410, LM610, LM810
LM1010, LM1012, LM1014 & LM1214
LM410, LM610, LM810
Tennsmith's LM Series mechanical shears utilize a low maintenance design, couple with an array of standard features for an attractive combination of high value and solid preformance. The LM410 incorporates the unique 2x-F back gauge system. This allows the operator to move the backstop from 0 to 24 inches in approximately 2 seconds with only two rotations of the handle. The LM610 and LM810 incorporate the same 2x-F system, but with the added capacity of 30-Inch travel. An optional digital readout is available for this system. The LM Series shears are standard with four-edge, high carbon, high chrome top and bottom blades, independent, self-leveling hold down feet with neoprene inserts, single, continuous and jog stroke cycles, motor reverse switch, precision-machined table with hand well, dual inch/metric inlaid bed scales and non-metalic gibs.
LM1010, LM1012, LM1014 & LM1214
LM1010, LM1012, LM1014 & LM1214
LM1010, LM1012, LM1014 & LM1214
Tennsmith's LM Series mechanical shears utilize a low maintenance design, couple with an array of standard features for an attractive combination of high value and solid preformance. The LM Series shears are standard with four-edge, high carbon, high chrome top and bottom blades, independent, self-leveling hold down feet with neoprene inserts, single, continuous and jog stroke cycles, motor reverse switch, precision-machined table with hand well, dual inch/metric inlaid bed scales and non-metalic gibs.
TENNSMITH Foot Squaring Shears
Model 36 & Model 52
Tennsmith's squaring shears offer precision shearing and rugged construction at an affordable price. The shear frame, bed and cutter head assemblies are constructed of heavy-duty cast iron. The shear bed is machined and then surface ground to precision tolerances to ensure an accurate working surface. These shears feature triaction, high-carbon/highchromium (HCHC) steel blades. Both the upper and lower blades have a 2-degree edge relief and the lower blade has an additional 1-degree face relief for maximum material penetration with minimum effort. Triaction blades help prevent material movement while shearing, prolonging blade life. Tennsmith shears have the most complete adjustment features of any sheet metal shear on the market. The lower shear blade is bedadjusting and the upper blade is adjustable by means of a truss bar on the cutter head. The spring-activated holddown feet clamp the work piece securely in place and are easily adjustable to compensate holding pressure for light or heavy gauge material. There is ample clearance between the holddown feet and shear blades to allow good operator vision for line-of-sight cutting. The standard, double-locking back gauge, which features embossed scales and vernier wheels for fine adjustment, gives highly accurate readings.
TENNSMITH Air & Hydraulic Shears
Model 36A, Model 52A & Model 52H
Tennsmith's power shears combine all of the features of our foot shears with the advantage and convenience of air or hydraulic operation. Tennsmith power shears are a productive addition to any shop. The air shears utilize heavy-duty, tie rod-type pneumatic cylinders, which provide up to 40 strokes per minute in capacity materials. A foot-operated air valve control, pressure regulator, air gauge, oiler/condenser cups and neoprene, padded holddown feet are standard features. We recommend a maximum air supply of 75 psi for operating these shears at rated capacity. Where air supply pressures exceed 75 psi, an in-line regulator is helpful to provide pressure control. The model 52H cycles at 45 strokes a minute, thanks to its first class hydraulic system. The hydraulic unit is of a low maintenance design featuring a solenoid actuated valve, 2-hp electric motor, self-contained pump in tank with pressure gauge, check valve and industrial quality cylinders. The motor is protected by a magnetic starter. Other electrical safety features include a low voltage on/off switch; low voltage, shrouded, electric foot switch, step-down transformer with low voltage circuitfuse; fully enclosed electrical box; and insulated reinforced conduit for all wiring. Models 36A and 52A are ideal ways to enhance shearing productivity with minimal investment. All shears are standard, equipped with highcarbon/high-chromium (HCHC) blades.