ROPER WHITNEY BEADING & CRIMPING

  A versatile machine designed for deep throat (up to 13″) beading, crimping, and other roll operations up to 18 gauge material. Back-geared, with steel horn, bronze bushed bearing and one-piece frame. Mounted on floor stand with adjustable motor mount, “V” belt drive, and 230V OR 460V, 3/4 hp. geared head motor. Unit includes gauges and spacing collars for all operations except flanging. Rolls ordered separately. **Call for pricing** 

  MODELS: 

184313617- NO. 3617 230V POWERED COMBINATION ROTARY MACHINE

184413617- NO. 3617 460V POWERED COMBINATION ROTARY MACHINE

  PEXTO forming machines included in this section offer a broad variety of shapes and capabilities in forming sheet metal for a combination of uses: beading, crimping, setting down, double seaming, turning, burring, wiring, elbow edging, flanging, and flattening. All are precise in the job they do and are readily adaptable to job requirements. The roll chart is indicative of their flexibility. Most are portable and may be set up at the job with a clamp-on base. The No. 622 Series is equipped with the addition of a 7″ deep throat for additional forming capabilities, such as furnace collar edging. The Model No. 622 includes a set of rolls (A, C, D, E & F) and gauges or may be ordered without rolls as Model No. 622LR*. **Call for pricing** 

  MODELS: 

164006220- NO. 622 COMBINATION ROTARY MACHINE 

264900622- NO. 622LR COMBINATION ROTARY MACHINE 

  PEXTO forming machines included in this section offer a broad variety of shapes and capabilities in forming sheet metal for a combination of uses: beading, crimping, setting down, double seaming, turning, burring, wiring, elbow edging, flanging, and flattening. All are precise in the job they do and are readily adaptable to job requirements. The roll chart is indicative of their flexibility. Most are portable and may be set up at the job with a clamp-on base.These machines include Ogee bead and crimping rolls to provide one pass combined crimping and beading. They are adjustable for deep or shallow beading and for “fade-away” crimping. By replacing the beading rolls with spacing collars (furnished), the machines can be used for crimping only. 3/8″ and 1/2″ Single Bead Rolls are available for the No. 0585 machine. The No. 0581 has a maximum capacity of 24 gauge. **Call for pricing** 

  MODELS: 

164005850- NO. 0585 BEADING/CRIMPING MACHINE

164005810- NO. 0581 BEADING/CRIMPING MACHINE 

  The No. 0381, 381 & 383 manual roll has 2″ precision turned and ground high carbon steel rollers. There are three wiring grooves 3/16″, 1/4″ and 5/16". All rolls are standard wih fully enclosed gear housings and all three rolls are driven. The upper roll lifts for conventional removal of the work piece. **Call for pricing** 

MODELS:  

167074381- NO. 0381 MANUAL ROLL BENDING MACHINE- 2" ROLLS x 42" L x 24ga mild steel

167072381- NO. 381 MANUAL ROLL BENDING MACHINE-

2" ROLLS x 36" x 22ga mild steel

167072383- NO. 383 MANUAL ROLL BENDING MACHINE- 2" ROLLS x 24" L x 20ga mild steel

  The No. 418 manual roll has 3″ precision turned and ground high carbon steel rollers. There are three wiring grooves 3/8″, 1/2″ and 5/8″. All rolls are standard wih fully enclosed gear housings and all three rolls are driven. The upper roll lifts for conventional removal of the work piece. The maximum sheet length is 48″ with a thickness capacity of 16-18 gauge mild steel. **Call for pricing** 

  MODELS:

167070416- NO. 418 MANUAL ROLL BENDING MACHINE-

3" ROLLS x 48" L x 16-18ga mild steel

  The SR-12 comes with high carbon, precision turned rolls that are ground to high finish. All gears are fully enclosed in housings and the upper roll is lifted with a cam-lever for ample clearance and removal of a full length work piece. Wiring grooves in the bottom and rear rolls are 1/8″ and 1/16″. **Call for pricing** 

  MODELS: 

167070121- SR-12 12-INCH ROLL